Chinese
Home  >>  News

Dust Collector Makes CNC Router a Clean Machine

Released on Dec 03, 2018

Dust Collector Makes CNC Router a Clean Machine

Everyone loves firing up that CNC router for the first time. But if the first thing you cut is wood, chances are good that the second thing you cut will be parts for some kind of dust shroud. Babysitting the machine and chasing the spindle around with a shop vac hose probably isn’t why you got it in the first place, right?

cnc router dust collector 1.jpg

Trouble is, most dust-management designs just don’t get the job done, or if they do, they obstruct your view of the tool with a brush or other flexible shroud. MISSILECNC figured he could do better with this coaxial dust collector. The design is a two-piece, 3D-printed affair, with a collar that attaches to the spindle and a separate piece containing the duct. The two pieces stick together with magnets, which also lets the shroud swivel around for optimal placement. The duct surrounds the collet and tool and has a shop vac hose connection. In use, the vacuum pulls a ton of air through small opening, resulting in zero dust. It also results in the occasional part sucked up from the bed, so watch out for that.

cnc router duct collector.jpg

Add.: No.10, Jiyang Street Industrial Park, Jinan ,Shandong Province, China

  1. Tel.: +86 531 8823 3860
  2. Mob.: +86 156 2882 8811
  3. E-mail: cw01@missilecnc.com
Copyright © MISSILECNC All Rights Reserved
TOP