Chinese
Home  >>  News

How to maintain CNC Router in winter?

Released on Jun 25, 2018

Now the weather is getting colder, many machines need special protection to be able to work normally, stone cnc machine is one of them, then how to maintain Stone engraving machine in winter?

Cnc router for stone with water cooling system, it in optimizing the stone cnc engraviong machine performance, at the same time itself also has limitations. Usually, a temperature suitable for engraving is between 0-45 degrees, when the temperature is below 0 degrees Celsius, the tap water used for cooling occurs frozen, will affect the use of the cnc machine. Moreover, stone cnc machine uses the relative humidity is between 30% -75%, too dry and too wet environment is not conducive to optimal play cnc machine control and power system. The winter dry environment is also not conducive to the normal use of the cnc machine.

  1. Temperature.

    In winter, the temperature has a great influence on the excellent woodworking carving machine. Before using, the wood furniture carving router users must do related check work, for example, if the use of oil that can finish the workload. After using, we need to discharge the water in the tank in time to ensure that the oil will not freeze.

  2. Clear.

    For the use of wood carving cnc router in winter, the cleaning work is very important to prolonging the life of cnc wood carving cutting machine.

CNC Router

So, in winter, you should pay attention to the warmth of the CNC Router engraving machine,timely removal of the remainder of the water in the aqueduct, avoid the next day freeze affect the water cycle; water pump should be promptly removed from multiply water tank or bucket, to avoid freezing in there. Secondly, we must pay attention to maintain the humidity within the plant, too dry, you can increase the number of times of mopping the floor, keep the plant the appropriate humidity.

As a China professional manufacturer, Jinan Missile CNC Equipment Co., Ltd. focuses on cnc wood engraving machine many years. So if you are interested in our economical price woodworking cnc router, or have any question about the cnc engraving cutting machine, please contact Jinan Missile CNC Equipment Co., Ltd.. We are support service 24 hours online.

Add.: No. 10, Jiyang Street Industrial Park, 220 National Road, Jinan City,Shandong Province, China

  1. Tel.: +86 531 8823 3860
  2. Mob.: +86 156 2882 8811
  3. E-mail: cw01@missilecnc.com
Copyright © MISSILECNC All Rights Reserved
TOP