Custom CNC Router For Signmaking,woodworking,cabinet Making, and Fiber Laser Cutting Machine.
Language
Custom CNC Router For Signmaking,woodworking,cabinet Making, and Fiber Laser Cutting Machine.
Advertising cnc router machines are not only suitable for advertising logos, but also for woodworking, gifts, seal engraving, wedding and other industries.
How to install the cutting tools of advertising cnc router machine?
Turn off the power and wait for the engraving machine to stop running.
2. Pull out the workbench and look for the fastening nut near the cutter head.
3. Use a wrench or other tool to loosen the nut.
4. Take out the original tools and put them away.
5. Install the new tool and retighten the nut with the corresponding tool.
6. Close the workbench and turn the power back on to test-run the new tool.
What should you pay attention to when installing advertising cnc router machine tools?
1. Before replacing the tool, be sure to cut off the power supply and wait for the engraving machine to completely stop running.
2. Choose the appropriate tool. The tool must be compatible with the software used by the advertising engraving machine. 3. Be careful when changing the tool to avoid cutting your hands or other parts by the tool.
4. After the tool is replaced, the debugging settings must be re-set to ensure the quality and accuracy of the engraving.
How to judge the degree of tool wear of advertising cnc router machine?
1. Observe the motion status of the machine tool: If the processing parameters, cutting amount and other settings are reasonable, and the machine tool vibrates greatly during processing and emits a "buzzing", it can be determined that the tool has reached a state of rapid wear and needs to be replaced.
2. Listen to the sound: If the cutting sound is very heavy or the scream is harsh, it means that the processing status of the tool is abnormal. At this time, you can stop a brief analysis. If the quality problem of the tool itself, the tool clamping problem, and the tool parameter problem are ruled out, then It should be possible to determine that the tool is worn, and processing needs to be suspended and the tool replaced.
QUICK LINKS
Custom Service Contact usMAIN PRODUCTS
