What is the service life of the advertising cnc router machine?
The service life of the advertising cnc router machine is more than 100,000 hours.
How to extend the service life of advertising cnc router machine?
1. The control box should be placed in a well-ventilated place and cannot be placed in high temperature areas. The machine should be placed in a dry and well-ventilated place (to prevent exposure to the sun).
2. Maintain good lubrication, check and clean the screw regularly, add or replace grease and oil, so that the screw, nut and other moving parts always maintain good lubrication to reduce the wear rate of the machine.
3. The continuous operation time should be less than 10 hours a day to ensure the cleanliness of the cooling water and the normal operation of the water pump. Do not cause water shortage in the water spindle motor. Change the cooling water regularly to prevent the water temperature from being too high. If the working environment temperature is too low in winter, the water in the water tank can be replaced with antifreeze.
4. Do not let the machine work in the same corner of the engraving machine table for a long time (in case the screw rod and guide rail are not in contact with the beam for a long time and cannot be reasonably lubricated).
5. Do not place debris (magnetic materials, overweight items, liquids) on the table or head of the engraving machine.