The limit alarm of the advertising cnc router machine is an early warning mechanism, which is very necessary. When encountering such an alarm, you do not need to panic. You can quickly solve it through some methods.
What's the matter with the limit alarm of the advertising cnc router machine?
Each advertising cnc router machine has its own working schedule. In layman's terms, it is the working area of the advertising cnc router machine. Only when engraving is performed within this range can the machine operate normally. Once the maximum size of the machine's stroke is exceeded, the control system will prompt: the stroke limit is triggered. After the limit switch alarms, the machine will automatically stop running.
How to solve the problem of limit alarm of advertising cnc router machine?
1. There is a "limit release" option on the operation interface of the advertising engraving machine, just click it. This operation only releases the alarm limit function, and subsequent related operations are required to operate normally.
2. Then check whether the size of the picture we made exceeds the specified size. If so, modify it; in addition, check whether the set coordinates for the day exceed the soft limit value range. If it exceeds, correct it.
3. If the connection between the shaft and the screw is loose, an alarm will occur. Tighten them.
Is the limit switch broken when the advertising cnc router machine is started and reset?
1. The ejector rod cannot reach the limit switch, just correct it.
2. The drive wire is not in good contact. Just try to fix the drive wire firmly.
3. The limit switch wire is not connected properly. Just connect the wire well.
4. The limit switch is broken, just replace it.
What is the importance of limit switch of advertising cnc router machine?
Customers should carefully check the performance of the limit switch before using the advertising engraving machine equipment to avoid failure and failure to achieve the limit function. The performance of the limit switch also protects the advertising CNC router machine equipment from damage caused by failures.
What is the limit switch of advertising cnc router machine?
The limit switch, also known as the limit switch, is installed on a relatively stationary object or a moving object. When an animal approaches the stationary object, the connecting rod of the switch drives the contact of the switch, causing the closed contact to break or the open contact to close.