What is the significance of advertising cnc router machine speed?
The speed of the advertising cnc router machine determines the engraving efficiency and quality, so it is one of the important indicators to pay attention to when choosing an advertising cnc router machine.
What determines the speed of advertising cnc router machine?
The speed of the cnc router machine is affected by many factors such as the mechanical structure of the engraving machine, the material to be processed, and the performance of the cutting tool. Generally speaking, the faster the engraving machine, the higher the processing efficiency, but it is also prone to problems such as engraving errors and serious tool loss. On the contrary, although the speed is slower, the stability is better, but the processing efficiency is also reduced accordingly.
How to adjust the speed of advertising cnc router machine?
1. Advertising cnc router machine starting speed: This parameter corresponds to the starting frequency of the motor. The take-off frequency is the highest frequency at which the drive motor starts directly without acceleration. Reasonable selection of this parameter can improve processing efficiency and avoid resonance in the low-speed section of the stepper motor with poor motion characteristics; however, if the parameter is selected larger, it will lead to braking deviation, so a margin must be left. The pickup frequency parameter is usually included in the motor's factory parameters .
2. Single-axis speed of advertising cnc router machine: The larger the single-axis value, the less time is spent in the acceleration and deceleration process, and the higher the efficiency. Generally, during the setting process, start with a smaller setting, run it for a period of time, repeat various typical movements, pay attention to observation, and then gradually increase the value if there is no abnormality. If abnormal conditions are found, reduce the value and leave an insurance margin of 50% to 100% .
3. Advertising cnc machine turning speed: It determines the maximum speed of the engraving machine when it performs circular motion. The larger the value, the greater the maximum speed of the engraving machine during arc motion. Generally speaking, the value of a machine tool composed of a stepper motor system is between 400-800, and a servo motor system can be set between 600-1000. If it is a heavy machine tool, the value should be smaller. During the setting process, start with a small setting, run it for a period of time, repeat various typical linkage movements, pay attention to observe the condition of the engraving machine, if there is no abnormality, then gradually increase it. If abnormal conditions are found, the value should be reduced and an insurance balance of 50% to 120% should be retained.
All in all, the speed of advertising cnc router machines is only one of the important indicators when purchasing equipment. We also need to consider other factors. MISSILECNC is a manufacturer specializing in R&D, production and sales of advertising cnc router machines. Everyone is welcome to come and buy.