Custom CNC Router For Signmaking,woodworking,cabinet Making, and Fiber Laser Cutting Machine.
Language
Custom CNC Router For Signmaking,woodworking,cabinet Making, and Fiber Laser Cutting Machine.
The processing speed setting of the advertising engraving machine is determined by many factors. The faster the equipment processing speed, the higher the production efficiency. When we process materials, we need to consider many factors in order to achieve the optimal processing effect.
How is the processing speed setting of the advertising engraving machine determined?
1. To determine the spindle speed, you must first start with the material. The higher the hardness of the material, the lower the spindle speed during processing. The stickier the material, the higher the spindle speed during processing.
2. Determining the spindle speed also depends on the diameter of the tool used. The larger the diameter of the tool used, the lower the spindle speed.
3. Determining the spindle speed also depends on the use of the spindle motor.
4. When the spindle speed decreases, the output power of the motor also decreases. If the output power is low, it will affect the processing, which will have a bad effect on the tool life and the workpiece. Therefore, when determining the spindle speed, pay attention to the spindle motor. of output power.
What is the appropriate processing speed setting for the advertising engraving machine|high precision cnc router machine? What are the precautions?
Generally speaking, the spindle speed should be determined based on the material, tool diameter and output power. When determining the spindle speed, you should analyze it according to your own specific situation to finally decide the spindle speed. Do not use recommended parameters.
What is the appropriate processing speed setting for the advertising engraving machine?
1. Engraving:
(1) Two-color plate engraving parameters
Badge
Speed: 18-24, rotation speed: 12000-14000
Big house number
Speed: 25-35, rotation speed: 12000-14000
(2) Large-angle knife engraving three-dimensional characters
Speed: 15-18, rotation speed: 16000-18000
2. Cutting:
(1) Organic glass (acrylic)
Thickness, speed, rotation speed
20mm, 5-6, 20000-22000
15mm, 6-7, 19000-21000
10mm, 8-9, 18000-20000
5mm, 10-12, 18000-20000
3mm, 10-14, 16000-18000
2) PVC (note: cut counterclockwise)
Thickness, speed, rotation speed
20mm, 8-12, 18000-20000
15mm, 10-14, 16000-18000
10mm15-20, 16000-18000
(3) Fron board (note: cut counterclockwise)
Thickness, speed, rotation speed
20mm, 15-20, 18000-19000
15mm, 20-25, 16000-18000
10mm, 20-25, 16000-18000
(4) Density board (note: cutting with single-edged knife)
Thickness, speed, rotation speed
18mm, 6-8, 18000-20000
15mm, 8-10, 18000-20000
10mm, 10-14, 17000-19000
(Note: The above are 3.175 milling cutter parameters)
(5) Two-color board
Thickness, speed, rotation speed
1.5mm, 12-20, 12000-14000
What should I do if the processing speed of the advertising engraving machine does not meet the standard after setting it?
1. Check whether the circuits on the inverter and wiring board are correct.
2. Readjust the internal parameters of the inverter.
3. The Weihong card, data cable, and wiring board are damaged, and the parameters in the DSP handle are incorrect. Please reset them.
QUICK LINKS
Custom Service Contact usMAIN PRODUCTS
